REL Acoustics Ltd of Great
Britain designs and manufactures high quality, award-winning sub-bass systems
for use in two-channel and multi-channel music and multi-channel home theatre
systems.What is a sub-bass system?Many so-called ‘full-range’ loudspeakers
cannot reproduce the low bass frequencies found on most music and movie discs,
which are necessary for the accurate reproduction of the original recording and
help to impart a natural ambience that is immediately recognisable by listeners
as being closer to ‘the real thing’. Of course, movie DVDs incorporate a
dedicated bass channel for the deeper bass special effects, but a properly
designed sub-bass system will not only reproduce these with accuracy, it will
also augment the output of conventional stereo and surround loudspeakers with
very low frequency bass that is felt rather than heard. The result is greater
fidelity. The system with a wider bandwidth will always sound more realistic and
ultimately more entertaining and stimulating. In many cases, the best way, the
only way, to add these critical bass frequencies is to introduce a correctly
designed sub-bass system, one which not only has the technical ability to reveal
the deepest sounds, but will also integrate seamlessly with the loudspeakers so
that your system speaks with one deeper, more natural voice. REL Acoustics
designs and builds specialised sub-bass systems that do just this. It doesn’t
build loudspeakers, it only builds sub-bass systems. For over ten years, the
evolving range of REL products has delighted audiophiles and cinephiles around
the world, and received universal critical acclaim. Its superiority remains
unchallenged, proving that genuine sub-bass is a rare commodity, and only
available from a specialist. Read more about sub-bass and discover how REL
build’s the world’s finest sub-bass systems…REL Acoustics, Ltd. of Bridgend,
Wales was founded in 1990 by Richard Edmund Lord. Dissatisfied by the
commercially available subwoofers of the day, Lord set out to build Himself
something better. Almost immediately, word spread of a Welshman who had built
this incredible sounding sub bass system and soon enough audiophiles began
searching out these legendary subs that were built like no other.Lord began
referring to them as sub bass systems, because the performance he had been able
to achieve was the result of system engineering. Where common subwoofers rely on
amplifying a line level signal, Lord had intuitively realized that the signature
of the entire system had to be built forward into a pre-conditioning signal that
allowed the sub to disappear into the music. Thus, from almost the very
beginning RELs used a special high-level circuit. Many of the basic elements
present in modern day RELs began finding their way into production RELs in the
later 1990’s.The modern era of REL began in 2005 when John Hunter and Donald
Brody acquired REL. Almost immediately, they identified several key paths to
take the strengths of the core REL philosophy and build upon them. First, the
designs had to be updated and made to look as wonderful as they sounded. Second,
for all their robust qualities, there was room for improvement in the area of
electronics and driver technology. Accordingly, they set about on a
comprehensive plan to upgrade and improve every aspect of the products; focusing
on reliability, clean styling and robust mechanical construction–a path that
continues to this day.
Today, REL is one of the fastest growing product ranges in the entire high end
with strong international partnerships all over the world and acclaim coming
from virtually every high end audio and home theater magazine. At its
cornerstone, fundamental reliability remains its core strength, blended with a
unique approach to design that results in what many consider the most musical
and powerful sounding subwoofers available.
At REL, we refuse to build entry-level
products. Serie T may be our most cost effective product but it is every inch a
high-end offering. From its full connectivity suite, to glass fibre circuit
boards and complex input schemes, to high-current amplifiers and large toroidal
transformers, Serie T abounds with quality. 5-layers of carefully applied
lacquer, paired with solid aluminium accents combine with deceptively simply
forms yielding a taut, timelessness to its design
REL
ZEROMKIII
Listino ufficiale
€. 549,00
Subwoofer
amplificato in sospensione pneumatica in classe D. Woofer a lunga escursione da
16cm con cono in alluminio. Potenza di amplificazione 100W in classe D con
moduli NextGen. Frequenza di crossover variabile da 30 a 120HZ. Ingressi sia ad
alto che basso livello con regolazione del volume e del taglio di frequenza
indipendenti. Ingresso LFE. Fase 0/180°. Dimensioni del cabinet molto compatte:
24x21x26cm. Finitura: Nero laccato o Bianco laccato. Cad.
T-Zero: Miracle in miniature. This modern life we inhabit, where less space
means more enjoyment in more rooms than ever before. Movies in the bedroom
growls, rumbles and springs to life, the gaming console in a spare room takes on
a whole new meaning when the effects are suddenly rendered with lifelike bass,
and your favorite digital music files appear and float in front of the listener
with lifelike clarity and power. T-Zero makes each experience better, enriching
even modest systems with power and natural bass.This is the premise of T-Zero;
bringing the quality and indeed the full REL connectivity suite, long throw
drivers and powerful, reliable amplifiers to a new lower price point and
dimension. T-Zero is, in many ways, the most difficult design we have ever
executed because never before have we delivered so much for so little with so
much quality. 5 coats of lacquer, as in all Serie T, next generation Class D
amplifiers, High level inputs, .1 separate input stages, rugged 6.5” main driver
with exceptional output and low bass extension for its size means T-Zero gives
up little to much larger units from the competitors.
REL
T5X
Listino ufficiale
€. 899,00
Subwoofer
amplificato in sospensione pneumatica in classe A/B predisposto wireless. Woofer
a lunga escursione da 20cm con cupola rovesciata e cono in lega di metallo e
fibre minerali. Irradiazione a pavimento. Potenza di amplificazione 125W in
classe A/B. Frequenza di crossover variabile da 30 a 120HZ. Ingressi sia ad alto
che basso livello con regolazione del volume e del taglio di frequenza
indipendenti. Ingresso LFE. Fase 0/180°. Predisposto wireless tramite Arrow
Transmitter opzionale. Dimensioni del cabinet molto compatte: 30x30,7x31,3cm.
Finiture disponibili: Nero laccato o bianco laccato. Cad.
REL
T7X
Listino ufficiale
€. 1.090,00
SSubwoofer
amplificato in sospensione pneumatica con radiatore passivo in classe A/B
predisposto wireless. Woofer a lunga escursione da 20cm con cupola rovesciata e
cono in lega di metallo e fibre minerali sul frontale e radiatore passivo da
25cm verso il pavimento. Potenza di amplificazione 200W in classe A/B. Frequenza
di crossover variabile da 30 a 120HZ. Ingressi sia ad alto che basso livello con
regolazione del volume e del taglio di frequenza indipendenti. Ingresso LFE.
Fase 0/180°. Predisposto wireless tramite Arrow Transmitter opzionale.
Dimensioni del cabinet: 35,6x32x36,3cm. Finiture disponibili: Nero laccato o
bianco laccato. Cad
REL
T9X
Listino ufficiale
€. 1.290,00
Subwoofer
amplificato in sospensione pneumatica con radiatore passivo in classe A/B
predisposto wireless. Woofer a lunga escursione da 25cm con cupola rovesciata e
cono in lega di metallo e fibre minerali sul frontale e radiatore passivo da
25cm verso il pavimento. Potenza di amplificazione 300W in classe A/B. Frequenza
di crossover variabile da 30 a 120HZ. Ingressi sia ad alto che basso livello con
regolazione del volume e del taglio di frequenza indipendenti. Ingresso LFE.
Fase 0/180°. Predisposto wireless tramite Arrow Transmitter opzionale.
Dimensioni del cabinet: 37x34x39,3cm. Finiture disponibili: Nero laccato o
bianco laccato. Cad.
REL
HT 1003
Listino ufficiale
€. 850,00
Subwoofer amplificato serie Home Theater in
sospensione pneumatica. Woofer frontale da 25cm in fibra di carbonio a lunga
escursione. Potenza 300W con amplificazione NextGen5 in classe D. Regolazione
del volume e della frequenza di taglio del xover. Fase 0-180°. Possibilità di
renderlo wireless attraverso l'adattatore esterno opzionale HT Air Wireless.
Ingressi stereo RCA e LFE RCA separato. Dimensioni del cabinet (lxaxp):
31,8x34,7x35,1cm. Finitura: Nero spazzolato. Cad
REL
HT 1205
Listino ufficiale
€.1.090,00
Subwoofer
amplificato serie Home Theater in sospensione pneumatica. Woofer frontale da
30cm in fibra di carbonio a lunga escursione. Potenza 500W con amplificazione
NextGen5 in classe D. Regolazione del volume e della frequenza di taglio del
xover. Fase 0-180°. Possibilità di renderlo wireless attraverso l'adattatore
esterno opzionale HT Air Wireless. Ingressi stereo RCA e LFE RCA separato.
Dimensioni del cabinet (lxaxp): 37,6x40,5x39,9cm. Finitura: Nero spazzolato.
Cad.
REL
HT
1508
PREDATOR Listino ufficiale
€.2.200,00
Subwoofer amplificato serie Home Theater in
sospensione pneumatica. Woofer frontale da 38cm in fibra di carbonio a lunga
escursione. Potenza 800W con amplificazione NextGen5 in classe D. Regolazione
del volume e della frequenza di taglio del xover. Fase 0-180°. Possibilità di
renderlo wireless attraverso l'adattatore esterno opzionale HT Air Wireless.
Ingressi e uscite sia RCA che XLR e LFE RCA separato. Possibilità di
posizionamento in stack. Dimensioni del cabinet (lxaxp): 50x45,7x49,2cm.
Finitura: Nero spazzolato. Cad
REL
CARBON
LIMITED
Listino ufficiale
€. 3.750,00
Subwoofer amplificato in sospensione pneumatica
in classe D predisposto wireless con Super High Output. Woofer a lunga
escursione in fibra di carbonio da 30cm con parapolvere centrale invertito, polo
centrale ventilato e emissione frontale. Radiatore passivo in lega leggera di
alluminio da 30cm con emissione verso il pavimento. Potenza di amplificazione
550W in classe D NextGen2 Class D. Frequenza di crossover variabile. Frequenza
minima 21Hz. Fase 0/180°. Connettore SMA per antenna wireless, per rendere il
subwoofer libero dal cavo di segnale tramite il prodotto proprietario Longbow
Transmitter opzionale. Logo del badge e piedini con tripla cromatura. Edizione
limitata a poche unità. Dimensioni del cabinet (lxaxp): 44.4 x 45.5 x 50.7 cm.
Finitura laccata nera ad 8 mani. Cad
REL
S/510
Listino ufficiale
€. 3.150,00
Subwoofer amplificato in
sospensione pneumatica in classe D predisposto wireless. Woofer a lunga
escursione da 25cm con emissione frontale e radiatore passivo da 30cm con
emissione verso il pavimento. Potenza di amplificazione 500W NextGen2 Class D.
Frequenza di crossover variabile. Frequenza minima 20Hz. Fase 0/180°. Ingressi
sia ad alto che basso livello. Ingresso LFE. Cabinet rinforzato e stabile su
nuovi appoggi a rotaia. Possibilità di utilizzo di più subwoofer in stack
sovrapposti. Dimensioni del cabinet (lxaxp): 40 x 41 x 46.4cm. Finitura: Nero o
bianco laccato. Cad
Power and Performance The Beautifully Balanced
S/3 S/3 derives from the flagship S/5 and offers a more compact footprint and
much of S/5 performance for use with either slightly more modest systems or
rooms that cannot handle the power and output of S/5. Qualitatively, it is the
equal of S/5, sans the grand scale, power and majesty of its larger sibling.
Beautifully balanced, S/3 offers powerful, incisive and beautifully balanced
performance.Specifications S/3 Type: Front-firing active woofer, down-firing
passive radiator Active Drive Unit: 10 in., 250mm long-throw, pressed Aluminium
chassis Passive Radiator: 12 in., 300mm Lower Frequency Response in Room: 22Hz
at -6 dB Input Connectors: Hi Level Neutrik Speakon, Left and Right Lo Level
phono, LFE phono, SMA for wireless antenna Gain Control Range: 80 dB Power
Output: 400 watts (RMS) Phase Switch: Yes, 0 or 180 degrees Amplifier Type: Next
Gen II Class D REL Longbow Wireless capability: Yes – REL Longbow™ transmitter [required],
Sold separately Protection System Fully Electronic with SET-SAFE: Yes D.C.
Fault: Yes Output Short: Yes Mains Input Voltage: 220-240 volts, 110-120 volts
for certain markets Fuses (semi delay): 5 Amp 220 volts operation 9 Amp 120
volts operation Dimensions (W x H x D)*: 16 x 16.7 x 18.25 in., (406 x 424 x
463.5 mm) Net Weight: 61.4 lbs. (27.85 kg) Shipping Weight: 71 lbs. (32.2 kg)
Finish (Gloss): Piano Black White
REL
S/812
Listino ufficiale
€. 3.850,00
Subwoofer
amplificato in sospensione pneumatica in classe D. Woofer a lunga escursione da
30cm con emissione frontale e radiatore passivo da 30cm con emissione verso il
pavimento. Polo centrale ventilato. Potenza di amplificazione 550W in classe D.
Frequenza di crossover variabile. Frequenza minima 21Hz. Fase 0/180°. Ingressi
sia ad alto che basso livello. Connettore SMA per antenna wireless, per rendere
il subwoofer libero dal cavo di segnale tramite il prodotto proprietario Longbow
Transmitter opzionale. Robusti piedini in alluminio satinato. Dimensioni del
cabinet (lxaxp): 44,4x45,5x50,7cm. Finitura: Nero o bianco laccato. Cad
OPTIONAL Trasmettitore wireless per subwoofer della serie S. + 400,00
euro
The Serie S Flagship The Majestic S/5 S/5 exceeds
the mandate for mid-level models and crosses this model into true reference
quality. S/5 produces exceptionally low bass with tremendous impact and speed.
Even difficult-to-render instruments such as pipe organs are dealt with
effortlessly.Large scale, high end 2-channel systems make a perfect pairing for
S/5 and grand theaters are ideal. Medium to grand rooms are appropriate. Scale
is Very Large, Speed is Exceptional, Attack and Slam is Visceral.
Specifications S/5 Type: Front-firing active woofer,
down-firing passive radiator Active Drive Unit: 12 in., 300mm long-throw,
pressed Aluminium chassisPassive Radiator: 12 in., 300mmLower Frequency Response
in Room: 20Hz at -6 dBInput Connectors: Hi Level Neutrik Speakon,Left and Right
Lo Level phono, LFE phono, SMA for wireless antenna Gain Control Range: 80
dB Power Output: 550 watts (RMS) Phase Switch: Yes, 0 or 180 degrees Amplifier
Type: Next Gen II Class DREL Longbow Wireless capability: Yes – REL Longbow™
transmitter [required],Sold separatelyProtection SystemFully Electronic with
SET-SAFE: YesD.C. Fault: YesOutput Short: YesMains Input Voltage: 220-240 volts,
110-120 volts for certain markets Fuses (semi delay): 5 Amp 220 volts operation
9 Amp 120 volts operation Dimensions (W x H x D)*: 17.5 x 18 x 20 in., (444.5 x
455.5 x 507 mm) Net Weight: 69.7 lbs. (31.6 kg) Shipping Weight: 79.5 lbs. (36
kg) Finish (Gloss): Piano Black White Lacquer Supplied Accessories Mains Lead:
Yes Neutrik Speakon Interconnect 10 Metres Nominal: Yes
REL
212
SX Listino ufficiale
€. 6.200,00
Subwoofer
amplificato in sospensione pneumatica con radiatore passivo in classe D
predisposto wireless. 2 Woofer frontali sovrapposti da 30cm con cono in lega di
alluminio CAST, a lunga escursione e con polo centrale ventilato. 2 Radiatori
passivi, uno verso il basso e l'altro posteriormente, da 30cm. Potenza di
amplificazione 1000W in classe D con NexGen3 e pressione di 110dB. Frequenza di
crossover variabile. Fase 0/180°. Ingressi sia ad alto che basso livello (Hi
level e .1/LFE) con regolazione del volume e del taglio di frequenza
indipendenti. Robusti piedini in alluminio satinato. Finitura: Nero laccato. Cad
Introducing 212/SE, our most powerful and agile
subwoofer, designed exclusively for larger system and rooms to allow superior
state of the art speakers to spring to full voice. We believe in quality first,
not simply power and boom. Specifications TYPE (2) Front-firing active drivers,
(1) rear passive, (1) down-firing passive ACTIVE DRIVER SIZE & MATERIAL (2) 12
in., 300mm long-throw, Continuous CastAlloy™ cone structure, cast chassis
PASSIVE RADIATOR SIZE & MATERIAL (2) 12 in., 300mm Continuous CastAlloy™ cone
structure, cast chassis LOW FREQUENCY EXTENTION -6dB at 19 Hz INPUT CONNECTORS
High Level Neutrik Speakon, Low Level stero RCA, LFE RCA, SMA for wireless
antenna OUTPUT CONNECTORS N/A POWER OUTPUT 1,000 watts (RMS)
AMPLIFIER TYPE NextGen3 Class D WIRELESS CAPABILITY Longbow (Optional), Zero
Compression, Individual discrete D/A and A/D Encoders Protection System FULLY
ELECTRONIC SET SAFE Yes D.C. FAULT Yes OUTPUT SHORT Yes MAINS INPUT VOLTAGE
220-240 volts, 1120-120 volts for certain markets FUSES 7 Amp semi delay
220 volts operation, 15 Amp semi delay 120 volts operationDimensions W X H X D
17.5 x 32 x 20 in. (444.5 x 815.5 x 507 mm) NET WEIGHT 122 lbs. (55.3 kg) FINISH
Piano Black Lacquer, 8 coats Supplied Accessories MAINS LEA Yes NEUTRIK SPEAKON
Yes (10 Meters Nominal)
REL G1
mKII Listino ufficiale
€. 5.500,00
G-1 Subwoofer amplificato in
sospensione pneumatica in classe A/B. Woofer a lunga escursione in fibra
di carbonio da 30cm con polo centrale ventilato. Potenza di amplificazione 700W
in classe A/B.
Frequenza di crossover variabile. Fase 0/180°. Ingressi sia ad alto che basso
livello (Hi level e
.1/LFE) con regolazione del volume e del taglio di frequenza indipendenti.
Telecomando in
dotazione per le regolazioni principali. Robusti piedini in alluminio satinato.
Possibilità di utilizzo di
più subwoofer in stack sovrapposti. Finitura: Nero laccato.
Gibraltar G-1 transforms the definition of deep bass for the home. Whether used
singly in multiples, we know of no finer ambient space and deep bass reproducer.
G-1 combines shocking speed and clarity with formidable power handling and depth.
G-1 combines a cabinet of remarkable complexity, with a power amplifier capable
of sufficient current production to develop even the lowest, sustained passages—whether
in ultra high-end home theater or the finest audiophile music system. And it all
starts with the fastest filter circuits ever fitted to a home subwoofer. The
bass note is then shaped and toned through truly environmentally friendly
recycled blue jean material used as damping, and explodes outward through an
ultra light, stiff carbon fibre 12” bass engine unique to G-1.The massively
beautiful, finned, alloy heatsink is necessary when dissipating the sorts of
power necessary for prodigious deep bass for hours on end. Capable of outputting
a conservative 600W (120V) on occasion, the dedicated REL Class A/B amplifier
used in G-1 is a true dreadnaught. Powerful, fast and capable of tremendous
current delivery, it is the finest amplifier ever designed by our engineersPower
is of little use unless properly directed. The filter circuit used in G-1 is the
fastest we know of in existence. Measured at just 4 milliseconds of group delay,
this design features a 2nd order Bessel function crossover that begins as low as
20 Hz, necessary because G-1 can extend lower than that in many rooms.
Additionally, we employ a secondary filter set at approximately 220Hz to roll
off any remnants of midrange that might otherwise be audible.
REL
N°25 Listino ufficiale
€. 9.500,00
Subwoofer amplificato
in sospensione pneumatica in classe D predisposto wireless. Woofer a lunga
escursione in fibra di carbonio da 38cm, parapolvere centrale invertito e polo
centrale ventilato. Potenza di amplificazione 1000W in classe D con NexGen3.
Frequenza di crossover variabile. Fase 0/180°. Ingressi sia ad alto che basso
livello (Hi level e .1/LFE) con regolazione del volume e del taglio di frequenza
indipendenti. Uscite XLR. Connettore Daisy chain per mettere più sub in cascato
a stack. Connettore SMA per antenna wireless, per rendere il subwoofer libero
dal cavo di segnale tramite il prodotto proprietario Longbow Transmitter
opzionale. Telecomando in dotazione per le regolazioni principali. Robusti
piedini in alluminio satinato. Possibilità di utilizzo di più subwoofer in stack
sovrapposti. Dimensioni (lxaxp): 73.6 x 54 x 76.2 cm. Finitura: Nero laccato con
12 mani di verniciatura. Cad.
No. 25 combines the power of an ultra-reliable
1,000 watt amplifier, with a lightweight and perfectly balanced carbon fibre 15”
driver. All this is controlled by our legendary filter sets and proprietary
crossovers with 2 separate parametric equalizers permitting remarkably flat
in-room response, while maintaining the speed and resolution for which modern
RELs have become known. We want our customers to enjoy all this performance
without being limited to only a few room locations, so we built-in our legendary
LongBow™ wireless receivers into every No. 25. This design utilizes zero
compression, resulting in stunning dynamics and bass extension without being
tethered to a cable, while delivering sound quality comparable to our
competitor’s hardwired designs. It’s just another example of how we strive to
offer complete and thoughtful solutions.Specifications TYPE Closed box,
front-firing driver ACTIVE DRIVER SIZE & MATERIAL 15 in., 380mm long-throw,
carbon fibre cone with inverted carbon fibre dust cap PASSIVE RADIATOR SIZE &
MATERIAL N/A LOW FREQUENCY EXTENTION -6dB at 14 Hz INPUT CONNECTORS High Level
Neutrik Speakon, Low Level stereo RCA, LFE RCA, LFE XLR, SMA for wireless
antenna OUTPUT CONNECTORS High Level, LFE RCA, LFE XLR Daisy Chain Outputs POWER
OUTPUT 1,000 watts (RMS) Ultra High-Current Power Supply AMPLIFIER TYPE NextGen3
Class D WIRELESS CAPABILITY Longbow (Optional), Zero Compression, Individual
discrete D/A and A/D Encoders Protection System FULLY ELECTRONIC SET SAFE Yes
D.C. FAULT Yes OUTPUT SHORT Yes MAINS INPUT VOLTAGE 220-240 volts, 110-120 volts
for certain markets FUSES 7 Amp semi delay 230 volts operation, 15 Amp semi
delay 115 volts operation Dimensions W X H X D 29 x 21.3 x 30 in. (736.5 x 540 x
762 mm) NET WEIGHT 168 lbs. (76 kg) FINISH Piano Black Lacquer, 12 coats
Supplied Accessories MAINS LEAD Yes NEUTRIK SPEAKON Yes (10 Meters Nominal)
SERIE HABITAT
REL
HABITAT 1 Listino ufficiale
€. 2.150,00
Subwoofer amplificato wireless. Slim design
per il suo posizionamento appeso al muro. Tecnologia proprietaria wireless non
compressa Longbow. 2 woofer frontali a Lunga escursione da 170mm e radiatore
passivo posteriore da 250mm. Potenza di amplificazione 200W in classe D.
Ingressi sia ad alto che basso livello con regolazione del volume. Ingresso LFE.
Fase 0/180°. Dimensioni del cabinet: 63,5x40,6x11,5cm. Finitura: Nero laccato o
Bianco laccato OPTIONAL Supporto in
acciaio da pavimento per subwoofer Habitat 1 + 200,00 euro
The
Future Is Now Habitat1 is a brilliant new concept that takes sub bass to new
levels by incorporating the room, your Habitat, into our design. It is common in
design circles to speak of taking the room into account, but never has the
complete system approach employed by REL been utilized so utterly to one
singular purpose. Perfect, deep bass that emanates almost invisibly from
somewhere hidden within the room Drivers Starting with a clean sheet of paper,
we designed custom bass mini-engines to produce truly awe inspiring bass in an
ultra-thin envelope Ease of installation We spent months engineering the
mounting hardware to permit easy and accurate mounting of Habitat1 onto a
variety of wall structures including masonry or brick walls, modern sheet rock
and stud construction. Although Habitat1 is intended to be used wirelessly with
the REL LongbowTM Wireless Transmitter, the rear panel includes all of the
standard connectivity so that users have the option of using Habitat1 wired if
desired. Wireless Key to the design goals of the project is the complete absence
of wires needed to move the signal flawlessly from player to Habitat1. REL’s
LongbowTM employs a new state of the art chip that, unlike virtually every other
design, has ZERO compression. Hence the fidelity to the original event is
retained perfectly and delay is minimized. Result? Crisp, clear bass in perfect
time with the music or film. Automatic detection and pairing is an important
component to the REL approach. Simply plug both Habitat1 and Longbow Wireless
Transmitter in within 30 seconds of each other and they will seek each other out
and auto pair. Forgot to do so in time? No issue, simply flick the pairing
toggle on each unit and pairing will occur within seconds. Connectivity
LongbowTM Wireless Transmitter permits use of the full complement of REL
connectivity, including wireless transmission of BOTH High Level and .1/LFE
concurrently, thereby producing the rich full bass weight missing from
conventional subwoofers. For home theater use the High Level and .1/LFE can be
run at the same time as each other to permit REL Reference Theater operation
that re-establishes consistent, full range bass in addition to special effects
bass. With REL there is no need to turn the sub bass system up for theater then
turn it down for music. Filter Technology One of REL’s unique technologies is
embedded within our input and filter boards. This is so secret that even now,
every unit is encased within an impregnable compound that ensures destruction of
critical components if disturbed. These circuits allow all the speed and
transparency of bass REL’s are famous for. Habitat1 can crossover as low as
25Hz, ensuring the ability to blend perfectly under even very sophisticated
speakers.
Legenda istruzioni
Clicca
per qui per vedere : FOTO PRODOTTO
Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
Nota
bene *
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a
info@newaudio.it
*I prezzi indicati
sono di listino ufficiale delle case produttrici ,nel
caso di diffusori si riferisce al prezzo del
singolo diffusore per offerte ed eventuali
promozioni telefonare o inviare e-mail.
*Il
presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i
prezzi indicati possono variare senza preavviso telefonare o inviare un
e-mail per ulteriori domande e conferme sui prezzi sopra riportati.
*Tutti i marchi citati nel presente listino sono di proprietà e
registrati alle rispettive Case Produttrici