HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 


AMPLIFICATORI

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


 

CONSTELLATION  INTEGRATED 1.0     €. 16.900,00         Per offerta e promozioni Telefona/E-mail

Integrato stato solido (125W/CH su 8 ohm) con phono e DAC USB opzionali

The Constellation Audio Inspiration INTEGRATED 1.0 is the newest member of Constellation Audio's most affordable Inspiration Series, and joins its preamplifier and amplifier line-mates in delivering the performance that is expected from Constellation Audio at a more affordable price. Delivering plenty of power, 100 wpc into 8 Ohms (and twice that into 4), a full array of balanced and single-ended inputs and outputs, a home theater bypass, and an included headphone amp, the Inspiration INTEGRATED 1.0 provides the easiest entrance into the world of Constellation Audio.Like all Constellation Audio products, the Inspiration INTEGRATED 1.0 takes full advantage of shared family technologies. Its design is based on the award-winning Inspiration PREAMP 1.0 and STEREO 1.0, combining the preamplifier and half of the stereo amplifier on a single chassis. The custom-designed binding posts are the same binding posts used on our Performance Series Centaur and Reference Series Hercules amplifiers.

CONSTELLATION  ARGO            €.  32.900,00         Per offerta e promozioni Telefona/E-mail

Integrato stato solido (125W/CH su 8 ohm) con phono e DAC USB opzionali

At Constellation Audio, musicality is always our primary concern-and our secondary and tertiary concern, too. But we do realize there are times when practicality is required. This is exactly why we created the Performance Series Argo integrated amplifier.  The Argo combines the Line Stage Gain Module concept of our Altair II and Virgo II preamps; the balanced bridged modular concept used in our Hercules II and Centaur amplifiers; and convenience features found on no other Constellation Audio products (yet). The sum of these stellar parts is a 125-watt-per-channel integrated amplifier that delivers the musicality of our larger components, yet is surprisingly compact-and yes, quite practical. With the addition of several new features and connections, the Argo is almost an entertainment system unto itself. It accommodates four analog audio sources (two XLR, two RCA). Two slots in the back accommodate optional USB digital-to-analog converter and phono preamp modules. Simply connect a pair of speakers and you have a complete music system. Or plug in a set of headphones and enjoy the sound of the Argo on a more intimate scale. All told, the Argo is something quite unprecedented in high-end audio: the incomparable quality of Constellation Audio, with the convenience of an A/V receiver. It was especially important to us that the Argo, despite its compact design, deliver the musicality for which numerous publications worldwide have praised our other products as among the best-if not the best-on the planet. To assure that the Argo would maintain the excellence of its forbears, we began with the same Line Stage Gain Module schematic that forms the basis of our Altair II and Virgo II preamps. This module is a fully complementary preamplifier circuit that uses servo circuits and hand-selected, ultra-low-noise field-effect transistors (FETs) to achieve essentially perfect balance between the positive and negative halves of the audio signal. With no musical details buried in an imperfectly balanced circuit, every tiniest sonic nuance is revealed.  Volume adjustment is accomplished through a digitally controlled resistive ladder. There are no potentiometers in the signal chain, thus none of the signal degradation and channel imbalance that even the best potentiometers can cause. From the Line Stage Gain Module, we route the perfectly balanced signals into our balanced bridged modular amplifier, built using the same single-ended 125-watt circuit module used in our state-of-the-art, 1,000-watt Hercules II monoblock amplifiers. These modules receive an abundant supply of clean power from our custom-wound toroidal transformer and substantial storage capacitors. The same distinctive (and highly effective) passive ventilation system used on the Hercules II and Centaur amps provides ample cooling. Even though the Argo packs a great deal of technology into its compact chassis, it maintains full dual-mono operation. Only the power supply transformer is shared. The amplifier and preamplifier circuits are laid out in a mirror-image arrangement that reduces interaction between the channels to a bare minimum.  As with our preamps, a 432 x 230-pixel high-contrast touchscreen provides a comfortable, intuitive method of control as well as detailed information about operating status and adjustments. A machined aluminum remote control provides quick access to the Argo's most-used functions. Is the Argo the most meticulously designed, lavishly constructed integrated amplifier in the history of audio? Probably. Is it the only way to get the musicality of Constellation Audio in a compact, living-room-friendly component? Definitely.Argo / Integrated Amplifier / Specifications  Specifications are preliminary and subject to change Inputs 2 XLR, 2 RCA, USB (for service and control systems), 3.5mm jack for 12-volt trigger  Outputs Argento Clamps speaker cable connectors, XLR balanced line-level, 1/4-inch/6.2mm headphone jack  Power output, 8Ω (1 kHz @ 1% THD+N) 125 watts  Power output, 4Ω (1 kHz @ 1% THD+N) 230 watts  Frequency response 10 Hz to 200 kHz, +0.5/-0.25 dB  Gain 38.6 dB  Volume control resolution 0.5 dB steps from 0 dB to -99.5 dBFS  THD+N (1 kHz @ 25W into 8Ω) 0.005%  Output impedance 0.08Ω  Damping factor (8Ω load) 100  Input impedance 20KΩ unbalanced, 40KΩ balanced  Output noise -83 dB A-weighted  Weight 40 lbs  Dimensions 5.5"/140mm x 17"/432mm x 15.75"/400mm (hwd)


PREAMPLIFICATORI

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


CONSTELLATION  PRE 1.0         €. 12.500,00          Per offerta e promozioni Telefona/E-mail

 Preamplificatore di linea stato solido con in/out XLR/RCA
When we created our original Reference series Altair line stage, our “dream team” of top engineers and designers asked themselves, “How close can we get to perfection?” Pretty close, according to many leading audio critics. So when it came time to create a line stage for our new Inspiration series, we asked ourselves, “How close can we get to Altair?” Once again, pretty close.
It's remarkable how much of the technology from the Altair II and Performance series Virgo II preamplifiers is preserved in the Inspiration PREAMP 1.0. The core audio circuits are the same. The power supply retains its triple-transformer design. The dual mono design is there, too. The chassis is built from CNC-machined aluminum slabs, crafted in the same metal shop that builds the enclosures for the Reference and Performance series components.We like to say the Inspiration PREAMP 1.0 is distilled, not diluted. It embodies the essence of our earlier work while retaining the subjective musicality and objective performance that won so much acclaim for our previous preamps.The most vital technology in our preamps is the Line Stage Gain Module, a fully balanced amplification circuit that uses servos to maintain a pristine balance between the positive and negative halves of the audio signal. The Line Stage Gain module in the Inspiration uses the same schematic as our other preamps, and almost all of the same parts, too. The Inspiration includes the Constellation Direct interface, which bypasses the input stage of Constellation Audio amplifiers to create a more direct signal path. As with other Constellation Audio line stages, we take great care in the Inspiration to ensure that the audio circuitry is protected from external vibration. The audio circuit board is suspended on isolators made from a soft, pliable material. The power supply is isolated from the audio circuits by a thick aluminum plate, then connected only with wires, rather than being built onto the same board as the audio circuits. Minor shocks and ground-borne vibrations do not affect the performance of the Inspiration PREAMP 1.0 in the slightest, nor do any vibrations coming from the power supply. Speaking of the power supply, it may come as a surprise to see how closely the Inspiration PREAMP 1.0's layout follows the example of its more costly brethren. Like the supply used for Altair II and Virgo II, the one in the Inspiration employs separate R-core transformers for left and right channels, and a third transformer to power the control circuits. Not only are left and right channels kept completely separate, the audio supplies are isolated from the control circuits to prevent interference. The biggest difference between the Inspiration and our other preamps is that the Inspiration's power supply is built into the front of the unit, where it is shielded to protect the audio circuits.At first glance, the Inspiration PREAMP 1.0 looks very much like the Altair II. And at second and third glance, too. This is because the key components that form the Inspiration's chassis are CNC-machined from aluminum, just as with our more expensive preamps. A unique joinery system, combining stiff steel buttresses with a system of notches that work much like the tongue-in-groove joints used in fine woodwork, assures a chassis that is almost as robust and vibration-resistant as if it were machined entirely from solid aluminum. The thick aluminum chassis walls also help shield the Inspiration PREAMP 1.0's audio circuits from electromagnetic and radio-frequency interference. As has become our tradition, the Inspiration is controlled through a convenient front touchscreen or through a machined aluminum remote. A polysilicon resistor array provides precise volume control, with none of the channel imbalance and taper inconsistency found in almost all potentiometer-type controls.Of course, the Inspiration PREAMP 1.0's most important characteristic is its sound, which in every way lives up to the reputation established by the Altair II and Virgo II. The slightest subtleties in every musical performance come through unaltered. No conventional balanced-topology preamplifier can equal the detail retrieval, delicacy and musicality the Inspiration PREAMP 1.0 effortlessly achieves. The gear disappears, and all that's left is you and your music.Preamp 1.0 / Line Stage / Specifications Inputs 3 XLR stereo, 3 RCA stereo, USB (for control) Outputs 2 XLR stereo, 2 RCA stereo, 12-volt trigger THD+N <0.001%, 20 Hz - 20 kHz @ 2V out <0.1%, 20 Hz - 20 kHz @ 10V out Frequency response 10 Hz to 100 kHz, ±0.5 dB Signal-to-noise ratio >-105 dB, A-weighted Input impedance (balanced) 20 KΩ Input impedance (unbalanced) 10 KΩ Output impedance < 50Ω Volume control resolution 0.5dB from 0dB to -90 dBFS Weight 25 lbs, 11.3 kg Dimensions (W x H x D) 17” x 5.25” x 15” 43.2 cm x 13.3 cm x 38.1 cm

CONSTELLATION  VIRGO III     €. 39.900,00          Per offerta e promozioni Telefona/E-mail

Preamplificatore di linea stato solido con alimentazione separata in/out XLR/RCA

Our original concept for the Performance Series Virgo preamplifier was to implement the same revolutionary circuit topology of our acclaimed Reference Series Altair preamp in a more cost-effective chassis. Through a substantial power supply upgrade, Virgo II now moves the Performance Series one step closer to the Reference Series.  Virgo II now includes the same power supply used for Altair. This supply offers numerous advantages. While the original Virgo’s power supply took electrical isolation to a high level with separate transformers and outputs for the audio and control circuits, the Virgo II supply enables true dual-mono operation, with separate transformers and outputs for left-channel audio, right-channel audio and control circuits. Thus, high demand in one channel does not affect the performance of the other channel. The new power supply also adds additional filtering to reduce noise and improve sonic detail. It is designed to fit directly underneath the Virgo II main chassis instead of behind the equipment rack, so it takes up less space and is easier to install. High-current-capacity Hypertronics cables, originally developed for aerospace applications, interface the power supply with the main preamp chassis.  Original Virgo preamps can be returned to Constellation Audio’s production facility for an upgrade to the new version. For even better fidelity, Virgo II and upgraded original Virgos are compatible with our new external DC filter, a component with additional power filtration and storage that fits between the power supply and the preamp’s main chassis. Otherwise, Virgo II retains all the characteristics that our “dream team” of the world's best audio engineers and industrial designers included in the original design. The core of Virgo II’s technology remains Constellation Audio’s Line Stage Gain Module, a fully complementary preamplifier circuit that achieves essentially perfect balance between the positive and negative halves of the audio signal. No conventional balanced-topology preamp can equal Virgo II’s musicality and transparency. Because audio signals emerging from Virgo II are so perfectly balanced, they can use Constellation Direct, a special interface that bypasses the amplifiers’ input stages for superior sound quality. We isolate the Line Stage Gain Modules and other audio circuits inside Virgo II by floating them on what we like to refer to as a “raft”: a metal plate that supports and isolates the circuitry. Audio circuits sit on top of the raft, while control circuits are suspended below. The entire assembly floats on an elastomeric suspension that isolates it from outside vibration, just as a calm lake isolates a floating raft from disturbances on shore. The metal plate also shields the audio circuits from the control circuits for greater sonic purity.  Virgo II’s robust chassis is machined from thick aluminum slabs to a minimum thickness of 8.2mm, adequate to block all common forms of electromagnetic interference. The power supply has the same type of construction, which shields the audio circuits in the preamp from the power supply’s electromagnetic energy. Through a 432 x 230-pixel screen and controls on the front, Virgo II provides a comfortable, intuitive user interface with detailed information about operating status and adjustments. A machined aluminum remote control accesses Virgo II’s most commonly used functions.With its upgraded power supply, Virgo II achieves the same seductive, tube-like sound of its predecessor, but with quieter backgrounds, more dramatic dynamics and, simply, more of what you choose Constellation Audio for: The finest sound quality available in the world today.Virgo III / Line Stage / Specifications Inputs 4 XLR stereo, 4 RCA stereo  Outputs 2 XLR stereo, 2 RCA stereo  THD+N (RI >10 K?) <0.001%, 20 Hz - 20 kHz @ 2V out<0.1%, 20 Hz - 20 kHz @ 10V out  Frequency response 10 Hz to 200 kHz, ±0.5 dB  Output noise ≤ 20 µV dB, 20 Hz - 20 kHz  Input impedance (balanced) 200 KΩ  Input impedance (unbalanced) 100 KΩ  Output impedance < 50Ω  Volume control resolution 0.5dB from 0dB to -90 dBFS  Weight, preamp 35 lbs/16 kg  Weight, power supply 22 lbs/10 kg  Dimensions, preamp 5.50 x 17.00 x 15.75 in (hwd) 140 x 432 x 400mm (hwd)  Dimensions, power supply 5.00 x 17.00 x 14.50 in (hwd) 127 x 432 x 368 mm (hwd)

CONSTELLATION  ALTAIR II                                         Per offerta e promozioni Telefona/E-mail

Preamplificatore di linea stato solido con alimentazione separata in/out XLR/RCA

Consider Altair II a collaborative effort. It began with the original Altair, created by Constellation Audio’s “dream team” of the world's best audio engineers and industrial designers. Our engineers then refined these original concepts using feedback from our dealers and customers. The result is a product with a more user-friendly interface, yet that retains the same sound quality as the original Altair, acclaimed by a leading audio magazine as setting a new standard “in virtually every sonic and musical criterion.” The front panel of Altair II features a new touchscreen control, which allows all functions to be adjusted directly from the front panel. The enhanced contrast and large font sizes used on the touchscreen allow it to be seen from across a room.Machined remote control An elegant new remote control, machined from aluminum billet and wrapped in leather, provides immediate access to the most commonly used functions, such as volume, balance, mute and phase.  While Altair II presents a friendlier, faster interface, its sound quality is in no way changed from the original Altair.The core of Altair II is our proprietary, fully balanced Line Stage Gain Module, one of the quietest and purest preamp circuits ever designed. Key to the module’s performance is the use of servo circuits to maintain a practically perfect balance between the positive and negative halves of the audio signal. To build the module, we rely on our “private stock” of field-effect transistors. These FETs—which, incidentally, are no longer available and are thus practically exclusive to Constellation Audio products—are the quietest we have found, and we assure superior performance by hand-testing and hand-selecting only the best samples from our inventory.Machined aluminum enclosures protect each Line Stage Gain Module circuit from the influence of external vibration and interference. We secure each of these enclosures to a platform incorporating an isolating polymer sheet between sheets of stainless steel. This platform mounts on an elastomeric suspension. The entire assembly works much like a raft floating on a quiet lake, thoroughly protected from onshore disturbances. A machined, solid aluminum enclosure with 8.2mm-thick walls houses the entire assembly and blocks electromagnetic interference.Altair II also benefits from what may be the most precise, sonically benign volume control ever created. Instead of the usual mechanical potentiometer, we use optically controlled resistors that can be adjusted to an accuracy of 0.1 dB. Because the connection between the control circuit is optical, not electronic, there is no possibility for interference between the control circuit’s microprocessor and the audio signal path.Separate Power Supply We power Altair II using a separate, triple-transformer power supply, itself shielded by a machined aluminum chassis. This supply delivers isolated power feeds to left and right channels and the control circuitry, thus preserving Altair II’s fully dual mono operation and outstanding channel separation. With its innovative circuitry and incomparable build quality, Altair II achieves something no other preamp can: the musicality of classic tube preamps with precision and dynamics matched by no other solid-state preamp. Only upon hearing the Altair II can one appreciate the musical experience it.  Altair !! / Line Stage / Specifications  Inputs 4 XLR stereo, 4 RCA stereo Outputs 2 XLR stereo, 2 RCA stereo  Recording outputs 1 XLR stereo, 1 RCA stereo THD+N (RI >10 KΩ) <0.001%, 20 Hz - 20 kHz @ 2V out<0.1%, 20 Hz - 20 kHz @ 10V out  Frequency response 10 Hz to 200 kHz, ±0.5 dB  Output noise ≤ 20 µV dB, 20 Hz - 20 kHz Input impedance (balanced) 200 KΩ  Input impedance (unbalanced) 100 KΩ Output impedance < 50Ω  Volume control resolution 0.1, 0.5, or 1 dB; user-selectable  Weight, line stage 84 lbs/38.2 kg Weight, power supply 26.2 lbs/11.4 kg  Dimensions, line stage 5.53 x 17.50 x 14.82 in (hwd) 140.4 x 444.5 x 376.4mm (hwd)  Dimensions, power supply 2.82 x 17.50 x 14.50 in (hwd) 71.6 x 444.5 s 368.3mm (hwd)


PREAMPLIFICATORI PHONO

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


CONSTELLATION  ORION                                               Per offerta e promozioni Telefona/E-mail

Preamplificatore phono stato solido MC/MM con in/out XLR/RCA

CONSTELLATION  PERSEUS       €. 37.300,00          Per offerta e promozioni Telefona/E-mail

Preamplificatore phono stato solido MC/MM con in/out XLR/RCA
When it came time to create the Perseus phono preamp for our Performance line, we couldn't bear to depart from the design of the Orion Reference line phono pre. After all, the Orion blended the best efforts of our “dream team”: the circuit wizardry of legendary engineer John Curl, the industrial design prowess of Alex Rasmussen at Neal Feay Company, and the engineering and manufacturing mastery of Peter Madnick. In the end, we decided not to change what works so well-thus, the Orion uses the same incomparable John Curl circuit, implemented in a way that is simpler and less expensive to manufacture.  Curl is revered by audiophiles as the world's greatest designer of phono preamps, having designed acclaimed phono pres for CTC, Mark Levinson, Parasound, SOTA, and Vendetta Research. In Constellation Audio products, his circuits receive greater care and more elaborate execution than any other manufacturer has ever offered.  The circuit board of the Perseus is built on a metal “raft” that floats on an elastomeric suspension, isolating the delicate circuits from outside vibrations. This is especially important in a phono preamp. Because of the low signal level coming from the phono cartridge, phono preamp circuits tend to microphonic; external vibrations can be amplified and become part of the audio signal. Thanks to the floating circuit board suspension, microphonics are practically eliminated.  More sonic improvements come from the machined aluminium chassis, which has a minimum wall thickness of 8.2mm-enough to block even the strong 50/60 Hz electromagnetic interference from household electrical circuits and appliances. The mass of the heavy metal enclosure also improves rejection of external vibration. The separate power supply provides an R-core transformer for left- and right-channel analog circuits and an independent supply for the control circuitry. Analog circuits receive pure, clean DC power. As a result, noise drops to insignificant levels and all of the intricate details of the music are revealed. Hypertronics interface cables and connectors, originally designed for demanding aerospace applications, provide ample conduits for the power supply's clean, high-current output.  The Perseus can be tuned to optimize its performance for even the most exotic phono cartridges. Front-panel controls allow adjustment of source impedance and load capacitance for the ideal performance from any cartridge you choose. Impedance is continuously adjustable from 0 to 1000 ohms for moving-coil cartridges. For moving-magnet cartridges, the Perseus provides four impedance selections from 33 to 100 kilohms as well as five load capacitance options from 200 to 400 picofarads. Whether you decide to follow the cartridge manufacturer's recommendations or explore your own course, the Perseus has the versatility to get the best possible sound from your cartridge.As appealing as the Perseus's design may sound in prose, its quality can be appreciated only when you hear it. We can't say it's the world's best phono preamp-that would be the Orion-but we think it's a clear second-best.Perseus / Phono Preamplifier / Specifications  Inputs 3 stereo XLR & 3 stereo RCA Outputs 1 stereo XLR, 1 stereo RCA  Gain, B & UB (Balanced & Unbalanced) 65db max  THD+N <.005% 10Hz - 20kHz  Frequency response +/-0.10db 10Hz - 20kHz  Output noise -100 dB re 2V output, 20 Hz to 20 kHz  Load impedance, MC inputs 0Ω to 500Ω  Load impedance, MM input 10KΩ to 100KΩ  Load capacitance, MM input 100 to 400 pF, selectable  Output impedance, B & UB < 50 ohm  EQ curve RIAA  Weight, phono preamp 35 lbs/16 kg  Weight, power supply 22 lbs/10 kg  Dimensions, phono preamp 5.50 x 17.00 x 15.75 in (hwd) 140 x 432 x 400mm (hwd)  Dimensions, power supply 5.00 x 17.00 x 14.50 in (hwd) 127 x 432 x 368 mm (hwd)


AMPLIFICATORI STEREO

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


CONSTELLATION  STEREO 1.0   €. 13.900,00          Per offerta e promozioni Telefona/E-mail

Amplificatore stereo a stato solido (200W/CH su 8 ohm) con ingressi XLR/RCA

Our original goal when we founded Constellation Audio was to apply the talents of our “dream team” of top engineers and designers to creating the finest components the audio world has ever seen. According to many noted experts, we've done just that. With this goal accomplished, we decided to see if we could bring the same concepts, the same care … and even the same audio circuits … to demanding audiophiles who crave the state of the art at a more modest cost.  The Inspiration STEREO 1.0 amplifier perfectly embodies this aesthetic. It's not exactly the same as our Hercules and Centaur stereo amplifiers, but one must look carefully to discover the differences.As with all Constellation Audio amplifiers, the heart of the Inspiration STEREO 1.0 is our unique Balanced Bridged circuit topology, which combines multiple single-ended amplifier modules in a fully balanced design.Our Balanced Bridged topology uses only N-type output transistors, so the two halves of the audio signal are always perfectly balanced. In most fully balanced amplifiers, the schematics for the positive and negative halves of the amplifier circuit are mirrored, but one half uses N-type transistors and the other half uses P-type transistors. Thus, a perfectly balanced output can never be achieved.  Achieving a perfect balance between the two halves of an audio signal is possible only when the incoming signal is itself perfectly balanced. This is why the Inspiration STEREO 1.0 uses the same Line Stage Gain Module circuit found in all Constellation Audio products. The Line Stage Gain Module's servo circuits assure that both halves of an incoming signal are perfectly balanced, no matter what the source.But if the source is a Constellation Audio preamp -- which of course has its own Line Stage Gain Module -- then so much the better. Because you can then use the Constellation Direct balanced input, which bypasses the Inspiration STEREO 1.0's input stage for the best possible fidelity.  Thus, the core amplifier circuits in the Inspiration STEREO 1.0 are essentially the same as in the Hercules and Centaur. Most of the parts are, in fact, identical. The main difference is that the input and gain stages are on the same circuit board, instead of being separated as in the larger amplifiers. Thus, while the Inspiration cannot quite equal the dynamics of its much larger brethren, the character of its sound -- or, perhaps more accurately, the lack of character of its sound -- is the same.Given its conservatively rated 200 watts per channel, though, you are highly unlikely to exhaust the Inspiration STEREO 1.0's dynamic reserves. A custom-wound toroidal transformer, feeding a total of 24 capacitors yielding a combined 240,000 microfarads of storage, assures that the Inspiration STEREO 1.0's output stages always receive the clean, ample voltage and current needed to achieve maximum musicality and sonic transparency. Massive heat sinks, ventilated through hundreds of ventilation ports in Constellation Audio's trademark machined-aluminum side panels, assure cool, reliable operation. The Inspiration STEREO 1.0 is the very essence of the Reference-series Hercules and Performance-series Centaur amplifiers, distilled into a more compact and affordable package. STEREO 1.0 / Stereo Power Amplifier / Specifications  Inputs 1 Constellation Direct XLR, 1 standard balanced XLR, 1 unbalanced RCA  Outputs metal binding posts  Power output per channel, 8Ω (1 kHz @ 1% THD+N) 200 watts  Power output per channel, 4Ω (1 kHz @ 1% THD+N) 400 watts  Frequency response 10 Hz to 80 kHz, +0/-0.5 dB  Gain 14dB Constellation Direct, 26 dB Balanced & RCA  THD+N (1 kHz @ up to 90% of rated power) <0.05%  Output impedance 0.1Ω  Damping factor (8Ω load) 80  Input impedance 20KΩ Constellation Direct, 10KΩ RCA unbalanced, 20KΩ XLR balanced  Siganl-to-noise ratio >-95 dB, A-weighted  Output noise <70 µV, 500 kHz BW, -116 dB @ 250 watts  Weight 55 lbs/24.9 kg  Dimensions 8.5 x 17.0 x 19.0 in 216 x 432 x 483 mm

CONSTELLATION  CENTAUR       €. 39.900,00         Per offerta e promozioni Telefona/E-mail

Amplificatore stereo a stato solido (250W/CH su 8 ohm) con ingressi XLR/RCA  Versione Centaur II Stereo Amplificatore stereo a stato solido (250W/CH su 8 ohm) con ingressi XLR/RCA € 49.900,00

The Centaur is the only stereo amplifier in the world that can deliver the power of a large solid-state design with all the delicacy and detail of the finest single-ended triode tube amplifiers.  Rather than bulking up the Centaur by simply adding more transistors—and losing the delicious subtleties and microdynamics for which smaller, simpler amplifiers are treasured—Constellation Audio’s “dream team” of engineers decided on a different approach.First, we built a superb-sounding 125-watt single-ended amplifier. Then we designed it as a module so that we could achieve any desired power rating by simply adding more modules. The resulting 250-watt-per-channel stereo amplifier sounds exactly like that original 125-watt single-ended amplifier, just twice as powerful.Like the Hercules, Constellation Audio’s top-of-the-line Reference series amplifier, the Centaur uses a balanced drive design, a unique, fully complementary circuit topology that achieves an essentially perfect balance between the positive and negative halves of an audio signal. Other fully complementary amplifiers use different types of transistors for the positive and negative halves of the signal, so they are never quite perfectly matched. The Centaur instead uses matched single-ended amplifier modules employing only N-type output transistors. Thus, an ideal balance—and the best possible fidelity—is achieved. Of course, the signal emerging from the Centaur can only be perfectly balanced if the incoming signal is perfectly balanced. This is why we condition incoming signals using the same Line Stage Gain Module found in the Virgo preamp. Thus, no matter what preamp you use, the signal that the Centaur provides to your speakers will be perfectly balanced. Customers who own a Virgo or Altair preamps, which already put out a perfectly balanced signal, may use the Constellation Link interface to bypass the Centaur’s gain module.  The Centaur could only achieve its outstanding performance with a clean, abundant source of power. To this end, we have equipped it with a large toroidal transformer with separate windings for left and right channels, as well as massive storage capacitors and fully regulated supplies for line-level circuits.We designed the Centaur to meet the needs of any and every audiophile, no matter what their tastes in music, what volume they prefer, what speaker they use, and what type of sound they like. It is the first stereo amplifier that simply leaves nothing to be desired.   Centaur / Stereo Power Amplifier / Specifications  Inputs 2 XLR (1 for Constellation Link), 1 RCA  Outputs metal binding posts Power output per channel, 8&Omega (1 kHz @ 1% THD+N) 250 watts Power output per channel, 4&Omega (1 kHz @ 1% THD+N) 500 watts  Power output per channel, 2&Omega (1 kHz @ 1% THD+N) 800 watts  Frequency response 10 Hz to 100 kHz, +1/-0.5 dB Gain 14dB (Constellation Direct)/26 dB Balanced & RCA  THD+N (1 kHz @ rated power) <0.05%  Output impedance 0.05Ω  Damping factor (8&Omega load) 160  Input impedance 10KΩ unbalanced, 20KΩ balanced  Output noise <70 µV, 500 kHz BW, -116 dB @ 250 watts Weight 98 lbs/44.5 kg  Dimensions 11.00 x 17.00 x 20.00 in (hwd) 280 x 432 x 508 mm (hwd

CONSTELLATION  HERCULES II                                   Per offerta e promozioni Telefona/E-mail

Amplificatore stereo a stato solido (500W/CH su 8 ohm) ingressi XLR/RCA

  The horizontal format of the Hercules II amplifier made it practical to create a stereo version—an amplifier in the same chassis as the Hercules II Mono, with the same effortless, extraordinary sound, but with two 500-watt channels instead of a single 1,000-watt channel. The Hercules II Stereo uses exactly the same circuit as the Hercules II Mono and the original Hercules. The same circuit that inspired a leading reviewer to describe our original Hercules amplifier and Altair preamp as “the most transparent, detailed, and cleanest electronics I’ve heard.” The Hercules II Stereo cannot quite match the dynamics of the Hercules II Mono, but the fundamental sound quality is the same.The Stereo benefits from the same upgrades we made to the Mono. The power supply features substantially larger storage capacitors, to deliver cleaner DC power and more headroom on loud peaks. The pure copper bus bars used for the speaker outputs and power supply rails are twice the size of those in the original Hercules. Both of these improvements allow the Hercules II Stereo to perform even better with low-impedance speakers.The transformers and digital control circuits are now isolated in their own fully shielded and suspended enclosure, to protect the audio circuits from electromagnetic interference and vibration, and to prevent any vibrations from the transformers from being carried into the listening room.Despite the reconfiguration from vertical format to horizontal, despite the splitting of the monoblock’s resources into two channels, the Hercules II Stereo maintains exactly the same sonic character, the same unprecedented combination of solid-state power and control with the warmth and musicality of a small, single-ended tube amplifier.All of our Hercules amplifiers have been based on the same circuit: a single-ended, 125-watt amplifier design tuned purely for musicality. Each of these amplifiers forms a module. Rather than bulking up the Hercules amplifiers with more and more components to make the desired power rating, we simply combine multiple 125-watt modules. This is why the 500-watt-per-channel Hercules II Stereo sounds exactly like that original 125-watt amp.The revolutionary Balanced Bridged circuit topology used in all Constellation Audio amplifiers gives the Hercules II Stereo exceptionally low noise and outstanding common-mode rejection ratio. But those are just technical terms. What’s more important is that with an essentially perfect balance between the positive and negative halves of an audio signal, the Hercules II Stereo achieves a level of musicality previously heard only in our other amplifiers. The key element in our topology is the use of only N-type output transistors, instead of a mix of N- and P-type transistors as found in other fully-complementary solid-state amplifiers. Because every element of the musical signal passes through exactly the same types of circuit components, all the musicality of the original single-ended module is preserved. All this would be for naught if the incoming audio signal were not itself perfectly balanced. For that, we equipped the Hercules II Stereo with the same Line Stage Gain Module used in our Altair II and Virgo line stage preamplifiers. The Line Stage Gain Module uses servo circuits and hand-selected field-effect transistors (FETs) to achieve the same perfect signal balancing found throughout the Constellation Audio line. If a Constellation Audio preamp is used, the amplifier’s Constellation Direct input, which bypasses the Line Stage Gain Module, provides the purest possible audio signal path.For each of Hercules II’s channels, a custom-wound 3,000-watt toroidal transformer, feeding a capacitor bank with even more farads of capacitance per watt than the one found in the original Hercules, provides a consistent, imperturbable source of DC power. Fully regulated, noise-free DC power supplies feed the low-level circuits. We do recommend the Hercules II Monoblocks for the very largest systems and the most demanding audiophiles. But for music lovers who don’t need the absolute maximum in power and dynamics, or whose listening room cannot easily accommodate two large monoblocks, the Hercules II Stereo can be the path to musical perfection.


AMPLIFICATORI MONO

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


CONSTELLATION  MONO 1.0     €. 13.900,00          Per offerta e promozioni Telefona/E-mail

Amplificatore mono a stato solido (400W/CH su 8 ohm) con ingressi XLR/RCA

We're immensely proud of the incomparable sound quality our “dream team” of top engineers and designers achieved with our Reference Hercules II and Performance Centaur monoblock amplifiers. We must admit, though, that building living-room-friendly high-end amplifiers has not been our strong point. Until now. The Inspiration MONO 1.0 amplifier easily delivers 400 watts per channel into 8 ohms, doubling to 800 into 4 ohms. This is power enough to produce incredible, concert-hall dynamics with any speaker. Yet it is the size of a standard audio amplifier and weighs just 55 pounds. When you consider that the Centaur Monoblock weighs in at 103 pounds, and the Hercules II Monoblock at 220 pounds, the Inspiration's ability to deliver incredible power from a modestly sized chassis is remarkable indeed.Also remarkable is that the audio circuits are based on the same original schematics our “dream team” originally created for Hercules. In fact, most of the parts are the same. The output stage uses the same Balanced Bridged topology, combining multiple, small single-ended amplifier modules into a large, fully balanced design. This unique concept allows the Inspiration MONO 1.0 to deliver all the delicacy and musicality of a small single-ended amp, with the dynamics and power of a large monoblock. Instead of employing an output stage made up of half N-type transistors and half P-type transistors as almost all other solid-state amplifiers do, the Balanced Bridged technology uses only N-type output transistors for both positive and negative halves of the audio signal. The result is that the two halves of the audio signal remain in perfect balance because their circuitry and components are identical. However, our Balanced Bridged design can achieve ideal performance only when it is fed a perfectly balanced signal in the first place. To this end, the Inspiration MONO 1.0's input stage uses the same Line Stage Gain Module circuit found in all Constellation Audio products. This module uses servo circuits to ensure that both halves of an incoming signal are perfectly balanced, no matter what the source. Systems that use a Constellation Audio preamp with the Inspiration MONO 1.0 can take advantage of our Constellation Direct input. Because our preamps also have the Line Stage Gain Module circuit, the signal does not need to go through the input stage of the Inspiration MONO 1.0. So one amplifier stage can be bypassed entirely, for a more direct signal path and even greater retrieval of inner detail and natural ambience.The power for the Inspiration MONO 1.0 comes from a custom-wound toroidal transformer, shielded within its own front compartment so its powerful electromagnetic energy does not interfere with the audio circuitry. The transformer feeds a bank of 24 capacitors, each of which offers 10,000 microfarads of storage. With so much energy on tap, the Inspiration can not only deliver incredibly high RMS power, it can also produce breathtaking dynamic peaks.Moving the transformer to the front allowed us to place the output transistors very close to the back panel, near the output terminals. This arrangement shortens the signal path and keeps the output impedance extremely low. Massive heat sinks on the sides of the amplifier breathe freely through hundreds of ventilation ports, keeping the amp cool and assuring long-term reliability. A special shielded channel carries the AC power from the IEC connector on the rear to the transformer in front.With tremendous power available, feeding the same circuit designs used in our larger monoblocks, all contained in a smaller chassis that weighs only about half as much as the Centaur Monoblock, the Inspiration MONO 1.0 clearly deserves membership in the Constellation Audio family. It's the essence of its big brothers, the Hercules II and Centaur-not diluted in any way, merely distilled.Mono 1.0 / Monoblock Power Amplifier / Specifications  Inputs 1 Constellation Direct XLR, 1 standard balanced XLR, 1 unbalanced RCA Outputs metal binding posts Power output per channel, 8Ω (1 kHz @ 0.2% THD+N) 400 watts Power output per channel, 4Ω (1 kHz @ 0.2% THD+N) 800 watts  Frequency response 10 Hz to 80 kHz, +0/-0.5 dB  Gain 14dB Constellation Direct, 26 dB Balanced & RCA  THD+N (1 kHz @ up to 90% of rated power) <0.05%  Output impedance 0.1Ω  Damping factor (8Ω load) 80  Input impedance 20KΩ Constellation Direct, 10KΩ RCA unbalanced, 20KΩ XLR balanced  Siganl-to-noise ratio >-95 dB, A-weighted  Output noise <70 µV, 500 kHz BW, -116 dB @ 250 watts  Weight 55 lbs/24.9 kg  Dimensions 8.5 x 17.0 x 19.0 in 216 x 432 x 483 mm

CONSTELLATION  CENTAUR      €. 39.900,00          Per offerta e promozioni Telefona/E-mail

Amplificatore mono a stato solido (500W/CH su 8 ohm) con ingressi XLR/RCA  versione  Centaur II Monoblock Amplificatore mono a stato solido (500W/CH su 8 ohm) con ingressi XLR/RCA 49.900,00   euro

For those who demand a musical presentation free of concerns about dynamics and distortion, yet with all the delicacy and detail that a single-ended tube amp delivers, we present the Centaur Mono. The Centaur Mono incorporates all of Constellation Audio's groundbreaking amplifier technologies in a package that is, shall we say, a bit more living-room-friendly than our 275-pound-each Hercules monoblock.  Each Centaur Mono delivers 500 watts per channel continuous power into 8 ohms. This is sufficient to drive any speaker ever made to maximum performance with power left to spare. When you own the Centaur Mono, there can be no doubt that your amplifier is delivering all the dynamics in whatever music you choose to play. Such extraordinary power also essentially eliminates concerns about amplifier distortion. Only Constellation Audio's “dream team” of engineers and designers could have come up with the radical modular design of the Centaur Mono. Most high-powered amplifiers are just bulked-up versions of smaller amplifiers-and as bulk is added,musicality is all too often lost. Instead of following this predictable and unsatisfactory approach, our engineers created a modular design, in which multiple 125-watt amplifiers are combined to achieve the Centaur Mono's 500-watt power rating. The sound is exactly the same as the smaller amp, but vastly more powerful. Along with the Hercules and the Centaur stereo amplifier, the Centaur Mono is one of the few amplifiers in the world that deliver true, fully balanced performance. Almost all amplifiers use N-type transistors for the positive half of the audio signal, and P-type transistors for the negative half of the signal. Thus, the two halves of the signal are not perfectly matched. The Centaur Mono instead uses Constellation Audio's exclusive Balanced Bridged design, which employs matched single-ended amplifier modules using only N-type output transistors. This arrangement achieves the truly balanced output that all fully complementary amplifiers strive for but only Constellation Audio achieves. Those who own a Constellation Altair or Virgo preamp can use the Centaur Mono's Constellation Direct balanced input, which bypasses the amplifier's input stage for better fidelity. For use with other brands of preamps, we provide a standard XLR balanced input that connects to one of our Line Stage Gain Modules. The Line Stage Gain Module, a circuit used throughout the Constellation Audio line, uses servo circuits and hand-selected, ultra-low-noise FETs to produce a signal that is in essence perfectly balanced. The perfectly balanced signal (already available from the outputs of the Altair and Virgo) allows Centaur Mono's Balanced Bridged amplifier design to achieve optimum performance.  To assure that the Centaur Mono never fails to exceed expectations, we gave it a potent power supply: a 1,600-watt toroidal transformer, numerous large storage capacitors, and fully regulated output for small-signal circuits. Huge heat sinks that run nearly the full height and depth of the amplifier assure proper cooling and reliability. The Centaur Mono delivers everything an audiophile could want: incredible power and incomparable finesse, in a chassis compact enough for easy installation in most listening rooms.Centaur Mono / Monoblock Power Amplifier / Specifications Inputs 1 Constellation Direct XLR1 standard balanced XLR 1 unbalanced RCA  Outputs dual metal binding posts  Power output, 8Ω (1 kHz @ 1% THD+N) 500 watts Power output, 4Ω (1 kHz @ 1% THD+N) 800 watts  Power output, 2Ω (1 kHz @ 1% THD+N) 1000 watts  Frequency response 10 Hz to 100 kHz +1/-0.5 dB  Gain 14 dB Constellation Direct26 dB Balanced & RCA  THD+N (1 kHz @ up to 90% of rated power) <0.05%  Output impedance 0.1Ω  Damping factor (8Ω load) 80  Input impedance 20KΩ Constellation Direct 20KΩ XLR balanced10KΩ RCA unbalanced  Output noise <70 µV, 500 kHz BW -116 dB @ 250 watts  Weight 103 lbs/46.7 kg  Dimensions (hwd) 11.00 x 17.00 x 20.00 in 280 x 432 x 508 mm

CONSTELLATION  HERCULES II                                  Per offerta e promozioni Telefona/E-mail

Amplificatore monofonico a stato solido (500W/CH su 8 ohm) ingressi XLR/RCA

When one of America’s best-known audio reviewers described our original Hercules amplifier, along with our Altair preamp, as “the most transparent, detailed, and cleanest electronics I’ve heard,” we knew our “dream team” of top audio engineers and industrial designers had achieved its goal: to create the world’s best amplifier. While no one could ask for more performance, some dealers and customers asked if we could build the tower-shaped Hercules in a more traditional, horizontally oriented enclosure that could fit into equipment racks. This is exactly what we have done with the Hercules II Mono. The amplifier circuitry is the same, merely reconfigured to fit the new enclosure.The new form factor also gave us space to incorporate significant upgrades. The Hercules II Mono power supply uses larger storage capacitors than the original Hercules, so the DC power is even cleaner and better to respond to extreme peak demands. We also had room to double the size of the copper bus bars used on the power supply rails and the speaker outputs. Both of these changes further enhance performance into low-impedance speakers.The dual 3,000-watt power transformers are now enclosed in their own shielded, suspended enclosure, along with the control circuitry. The shielding protects the audio circuitry from electromagnetic interference produced by the transformers and control circuits. The suspension prevents vibration from the transformers from leaking into the audio circuitry or into the listening room.
Although the form factor of the Hercules II Mono is more convenient, it still delivers the same incomparable combination of tube-like warmth and limitless dynamics.We’ve always loved the depth and delicacy that single-ended triode tube amps provide, yet we wanted more: more power, more dynamics, and more compatibility with different types of speakers. Thus, we based the original Hercules design on a single-ended amplifier: a 125-watt design tuned purely for musicality. By building these single-ended amplifiers as modules, and combining multiple modules in a single chassis, we could create a 1,000-watt monoblock that sound exactly like that original 125-watt amp. The Hercules II Mono employs a revolutionary twist on the concept of a fully balanced amplifier. In all balanced amplifiers, mirror-imaged amplifier circuits are used, with one part amplifying the positive half of an audio signal, and the other part amplifying the negative half. Yet in other balanced amps, the two halves are not quite equal, because one uses N-type transistors and the other uses P-type transistors. Hercules II achieves an essentially perfect balance by combining two matched single-ended amplifiers using only N-type output transistors. Every element of the musical signal passes through exactly the same types of circuit components, maintaining all the musicality of the original single-ended module.Of course, if the incoming audio signal is not perfectly balanced, it does little good for the amplifier to be perfectly balanced. To ensure a pristine incoming signal, we equip Hercules II Mono with our Line Stage Gain Module, the same circuit used in our Altair II line stage. Our Constellation Direct interface allows this gain stage to be bypassed if a Constellation Audio preamp is used.As with its predecessor, the performance of the Hercules II Mono is not affected by the speaker, nor by the program material, nor by the listening volume. It delivers the same musical intimacy and emotion with any speaker, with any music, at any volume. It is exactly what audiophiles have always wished for... but never really dared to hope for.
 


DAC

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


CONSTELLATION  CIGNUS         €. 39.900,00           Per offerta e promozioni Telefona/E-mail

DAC stato solido a 32 bit 192kHz con ingressi USB e digitali    Versione  con player di rete e alimentazione separata 48.700,00

The Cygnus is designed for the way audiophiles listen to music today—and the way they will listen to it in the future. It combines an advanced digital-to-analog converter with digital file access and browsing capabilities. Audiophiles can easily access music files stored on hard drives or USB sticks, and can use the Cygnus to achieve truly extraordinary sound from digital sources as diverse as satellite radio, cable and satellite TV set-top boxes, and of course the traditional CD player.  No matter what the source, the Cygnus’s digital-to-analog conversion circuitry will reproduce it with the fidelity exceeded only by that of our Sirius Reference series HD digital audio source. The 32-bit/192-kilohertz DAC easily accommodates the most high-resolution audio files available today. The Cygnus actually contains four 32/192 DACs in a stereo balanced configuration, with separate DACs used for the positive- and negative-going signals of the left and right channels.A DSP-based digital filter of our own design not only achieves optimum performance from the 32/192 DAC, it also allows the user to fine-tune the sound by selecting different filters. Numerous filter profiles, such as minimum-phase, phase-perfect, Bessel and Butterworth, are available. Although it probably sounds very technical, there’s no engineering knowledge needed—just try the different filters and pick the one that best suits the system or the music. The USB jack allows connection of any USB-compatible hard drive or USB stick. The 432 x 230-pixel front screen displays artist/album/track information and allows easy browsing by artist, genre, etc. Alternatively, you can browse digital files through an iPod touch, iPhone, iPad or Android smartphone or tablet. An optional computer-compatible USB input extracts digital audio files from computers then converts them to pure I2S format, with separate data and clock signals for much lower jitter and far better sound than one would expect from computer audio. Five traditional digital audio inputs—AES/EBU, two SPDIF coax, two TosLink optical—allow connection of practically any type of digital audio source device. The output stage of the Cygnus is the same Line Stage Gain Module found in the Virgo preamp, in a fixed-gain version. The Line Stage Gain Module is a fully complementary preamp stage that uses mirror-imaged circuits—one for the positive half of the signal, one for the negative half—for superior noise rejection, faster slew rate and wider frequency response. The audio circuit is built entirely from discrete components, with no ICs used for analog audio functions. The internal construction of the Cygnus resembles that of no other DAC (except, of course, our own Sirius HD digital music source). The circuitry is built on a “raft,” a plate that floats on an elastomeric suspension to maintain a tranquil environment for the sensitive audio circuitry. The top of the raft hosts the analog audio circuitry. Digital and control circuitry is suspended under the raft, and the plate isolates the audio circuitry from interference.A separate power supply provides two separate power feeds: an analog circuit based on an R-core transformer to power the analog circuits, and another power supply circuit to feed the digital and control circuitry. High-quality Hypertronics cables, originally developed for demanding aerospace applications, conduct power from the supply to the digital file server. Machined aluminium enclosures with a minimum wall thickness of 8.2mm bars electromagnetic interference from entering the chassis and affecting performance.  As its name suggests, the Cygnus is so far beyond the capabilities and quality of a standard DAC or disc player that it belongs in its own product category. It is sure to be emulated, but unlikely to be equalled Cygnus / Digital file player/DAC / Specifications Supported digital file formats FLAC, WAV, AIFF  DAC inputs 1 AES/EBU, 2 RCA SPDIF, 2 TosLink, 1 USB (optional)  DAC outputs RCA and XLR stereo analog audio  Supported sampling rates/bit depth Up to 192 kHz/32 bits on USB/AES/SPDIF Up to 96 kHz/32 bits on COAX/AES/TosLink  Available filter profiles minimum-phase, phase-perfect, Bessel, Butterworth  THD+N <0.01%  Frequency response 20 Hz to 22 kHz, ±0.2 dB  Output noise ≤100 dB  Output impedance, B & UB <50 ohm  Weight, digital file player 35 lbs/16 kg  Weight, power supply 22 lbs/10 kg  Dimensions, digital file player 5.50 x 17.00 x 15.75 in (hwd) 140 x 432 x 400mm (hwd)  Dimensions, power supply 5.00 x 6.00 x 14.50 in (hwd) 127 x 152 x 368mm (hwd)

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietŕ e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it