.jpg)
 
WILSON BENESCH THE
Full Circle €.3.400,00
Per offerta
TELEFONA/E-MAIL
WILSON BENESCH
THE Circle
€.1.400,00
Per offerta
TELEFONA/E-MAIL
WILSON BENESCH
THE FULL Circle STAND
€.1.400,00
Per offerta
TELEFONA/E-MAIL
 The
Full Circle TurntableThe Full Circle is a tribute to the medium of vinyl and
it's unique position in the music lover's life. It has re-defined the way that
analogue will evolve in the next century and eloquently re-affirms the long term
viability of the format. The solution is comprised of three State of the art
components, the Circle turntable, a.c.t. 0.5 tonearm and Ply moving coil carbon
fibre bodied cartridge. With a set up time of less than one hour, the complete
product requires no "tuning" and will remain stable and reliable
indefinitely.Wilson Benesch is the world's foremost authority on the use and
function of advanced composite structures when applied in audio systems. Over
ten years of research and development lie behind this imaginative and unique
product.As a complete solution it is a landmark product, however, the modular
design framework elevates its value above and beyond the conventional. A totally
unique solution that achieves a broad range of design objectives previously
impossible in one package.The Full Circle is a tribute to the medium of vinyl
and it's unique position in the music lover's life. It has redefined the way
that analogue will evolve in the next centaury and eloquently re-affirms the
long term viability of the format. The solution is comprised of three
state-of-the-art components, the Circle turntable, a.c.t. 0.5 tonearm and Ply
moving coil carbon fibre bodied cartridge. With a set up time of less than one
hour, the complete product requires no "tuning" and will remain stable and
reliable indefinitely.Wilson Benesch is the world's foremost authority on the
use and function of advanced composite structures when applied in audio systems.
Over ten year's of research and development lie behind this imaginative and
unique product.As a complete solution it is a landmark product. However, the
modular design framework elevates its value above and beyond the conventional. A
range of upgrade paths that will continue to grow as research and development
continues to provide the owner with a range of options for improvement over time.
In every sense, The Full Circle represents the ultimate long term solution to
analogue replay. A future proof solution in every detail.The Circle Advanced
materials used throughout.Totally unique design concept.Low mass
design.Immensely stiff unidirectional carbon fibre rods used in the principle
structural components.High tolerance phosphor bronze plain bearing with tool
steel spindle.The Ply - moving coil cartridgeThe ply is the perfect starting
point for the circle, complimenting as it does the advance materials technology
used in both the tonearm and the turntable.The Ply is a derivative of the Matrix
cartridge.The ply is sold as part of the Full Circle Package.The maintenance
costs are excellent.The net result is a robust design that provides no
unnecessary frills. What is achieved is maximum performance at a highly
competitive price.The Ply SpecificationPhysical Stylus Tip Type NUDE ELLIPTIC
DIAMOND Stylus Tip Radius 7.6/17.7 MICRO MILLIMETRE Cantilever SOLID BORON Coil
Former PUREIRON Coil COPPER Body SOLID WOVEN CARBON FIBRE Thread 2.5 mm V.T.A.
20 Degrees Weight 6 gms Electrical Output Voltage LOW 0.58mV HIGH 1.58mV Coil
Impedance 25 OHMS Freq Response 10-50 KHZ Channel Balance BETTER THAN 0.5 db
Dynamics Dynamic Comp 15 uM / Mh System Matching Parameters Resistive Load 10 -
47 KOHMS Tracking Force 1.8 - 20 gms Arm V.T.A. HORIZONTAL The A.C.T. 0.5 -
tonearmThe Wilson Benesch a.c.t. 0.5 tonearm is derived from the world's most
advanced tonearm, the Wilson Benesch a.c.t. two. The fundamental design features
of the a.c.t. 0.5 tonearm are exactly the same as the a.c.t. two.Wilson Benesch
tonearms are quite unlike any other tonearm design in every respect.Unique
curved carbon fibre arm tube.Unique Kinematic bearing. Exhibits stiction free
operation.Will last indefinitely.Every one sounds the same.Unaffected by
temperature.Dynamic damping is a natural function of the design.High pressure
contact points between all moving surfaces.Unique counterbalance
arrangement.Provides non compliant counter mass.Provides azimuth
adjustments.Provides bearing stabilization.Unique sound unlike any metal (conventional)
product.Carbon tubeTorsionally 10 times stiffer than titanium.Half the mass of
aluminium.5 times the specific stiffness of steel.Order of magnitude better
damping than most engineering metals.
BRACCI
WILSON BENESCH
NANO
TUBE
€.3.750,00 Per
offerta
TELEFONA/E-MAIL
As
the world’s leading authority and pioneer of the use of carbon fibre technology
in audio structures Wilson Benesch is delighted to announce, the latest results
of its on going research and development. There are three key factors in the
design of the tube of any tonearm:~ 1. The form of the tube: Based on natures’
rules Hyperbolic form 2. The stiffness of the tube: Strength facts,
compare Magnesium 275 MPa to Nano carbon 62,300 MPa 3. The damping capabilities
of the tube: Anisotropic materials like carbon fibre direct energy and exhibit
high levels of damping perpendicular to the fibre. Carbon fibre is vastly
superior to metal structures that propagate energy in all directions very
efficiently. The Nanotube is second to none by several orders of magnitude. It
is the most advanced manifestation of the tonerm tube ever createdThe Nanotube
is a tonearm that defies belief. The structural performance of the A.C.T.
Series of tonearms, have set the standard in terms of stiffness to weight ratio,
as well as damping, since their introduction 17 years ago. The Nanotube is
much more complex. The tube is derived from the ideal natural form, of a
hyperbolic curve, and so places the material, in exactly the place where the
beam requires it to be, in order to achieve the stiffest structure, with the
least amount of material. The tube itself, iscomposed of a woven helix of carbon
fibre, to provide the stiffest torsional strength andthe most damping, from the
billions of carbon fibre filaments. Further localisedstiffening, has been
determined by compute r modeling. Super high modulasuni-directional fibres, are
deployed in these regions, adding immense stiffness withvirtually no additional
mass. The Epoxy resin matrix is then enhanced with nanotubes.After its creation,
the tube is improved still further by the addition of low mass, high compression
internal bulkheads. These enhance tube stiffness and also provide high
performance, cross axial damping. The internal wire is isolated by these
structures also,providing the ideal disposition for the low level signals. No
additional finishing is added to the tube for aesthetic considerations as this
would add mass that has no sonic benefit.The result sees a structure that is
more than an order of magnitude superior to its predecessors in terms of
stiffness and damping. An amazing achievement giventhe previous benchmark, which
in our opinion, was already more than several orders of magnitude superior to
any metal or ceramic design!
.jpg)
WILSON BENESCH
ACT 2.0
€.2.000,00
Per
offerta
TELEFONA/E-MAIL
The
Wilson Benesch a.c.t. 0.5 tonearm is derived from the world's most advanced
tonearm, the Wilson Benesch a.c.t. two. The fundamental design features of the
a.c.t. 0.5 tonearm are exactly the same as the a.c.t. two.Wilson Benesch
tonearms are quite unlike any other tonearm design in every respect.. The A.C.T.
2 In the award winning ACT Two, Advanced Composite Technology is used to create
the lightest, stiffest, most highly damped tube on the market which is almost
15% lower in mass than the ACT 0.5. The ACT Two provides all the technically
proven virtues of the ACT 0.5 but in a more refined package.The ACT Two is
further testimony to our single minded commitment to the analogue medium and is
a worthy addition to the Wilson Benesch product range.Arm TubeWilson Benesch Ltd
was the first company in the world to produce a fully moulded, single component
arm tube. Torsionally it is typically ten times stiffer than conventional arm
tubes. It is three times stiffer in bending and an order of magnitude better at
damping audio frequencies. Carbon fibre is unquestionably ideal for this
function. The structure is formed from two contra rotating helixes of pure
carbon fibre, much the same as some of the most effective natural structures
which have benefited from millions of years of design refinements.The shape of
the beam is also quite natural as it has been determined precisely by its
function and physical limits, rather than by the crudities of a manufacturing
process as in the case of metals or ceramics. As a result, material use is exact
and exists only where it is required. It should be noted that this is quite
different from the mass produced straight carbon fibre tubes being used in other
designs. The performance of the carbon beam is matched by the equally effective
and equally unique Kinematic bearing. The combined function of the bearing and
counterbalance provides the ideal mechanism for a tonearm movement. The benefits
of this technology for the end user are significant. All aspects of reproduction
are improved as the cartridge is provided with the opportunity for the first
time to do its job without being heavily influenced by the function of the
system designed to support it.Kinematic bearingThe bearing system of the ACT 0.5
and ACT Two tonearms is unique, although its operation is derived from a long
established engineering principle, namely Kinematic location. Basically, the
theory of Kinematics states that there are just six types of motion that a body
can experience. Movement in the three axes of our three dimensional world and
rotation in each of these axes. These motions are known as the six degrees of
freedom. To fix a body in space one must prevent movement in each of these. The
kinematic bearing system allows just two degrees of freedom. Rotation about one
axis to track the record and rotation about a second axis to allow for any
vertical movement of the cartridge. All linear motions are completely eliminated,
thus giving the cartridge a super stable reference from which to carry out its
task as a measuring instrument. Indeed the classic application of Kinematics is
in the design of high precision laboratory measuring equipment.The bearing is
stabilised by the low slung counterbalance beams which eliminate radial
movements of the tube. The simple design also permits fine adjustments of
azimuth. Single point contact between the counterbalance and beam is provided by
four carbon chrome balls thereby avoiding troublesome resonance from a compliant
type of mounting. The whole system is simple and reliable; there is no need for
adjustment; it is unaffected by temperature change; pre-loading is no longer a
concern; damping is catered for; the whole component functions without any noise.
It will perform as well in thirty years time as it does today! It is important
to note that neither a ballrace nor a uni-pivot can claim to satisfy the
requirements of Kinematic location or indeed the other advantages incorporated
into this deceptively simple solution.
.jpg)
WILSON BENESCH
ACT 0.5
€.1.400,00 Per
offerta
TELEFONA/E-MAIL
The
Wilson Benesch a.c.t. 0.5 tonearm is derived from the world's most advanced
tonearm, the Wilson Benesch a.c.t. two.
The fundamental design features of the a.c.t. 0.5 tonearm are exactly the same
as the a.c.t. two.Wilson Benesch tonearms are quite unlike any other tonearm
design in every respect..The A.C.T. 0.5 - tonearmThe Wilson Benesch a.c.t. 0.5
tonearm is derived from the world's most advanced tonearm, the Wilson Benesch
a.c.t. two. The fundamental design features of the a.c.t. 0.5 tonearm are
exactly the same as the a.c.t. two.Wilson Benesch tonearms are quite unlike any
other tonearm design in every respect.Unique curved carbon fibre arm tube.Unique
Kinematic bearing. Exhibits stiction free operation.Will last indefinitely.Every
one sounds the same.Unaffected by temperature.Dynamic damping is a natural
function of the design.High pressure contact points between all moving
surfaces.Unique counterbalance arrangement.Provides non compliant counter
mass.Provides azimuth adjustments.Provides bearing stabilisation.Unique sound
unlike any metal (conventional) product.Carbon tubeTorsionally 10 times stiffer
than titanium.Half the mass of aluminium.5 times the specific stiffness of
steel.Order of magnitude better damping than most engineering metals.
Legenda istruzioni
Clicca
per qui per vedere : FOTO PRODOTTO
 Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
 Clicca
per qui per vedere : DATI TECNICI SPECIFICHE
PRODOTTO
Attenzione
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a info@sinergy.us
info@newaudio.it
Il presente listino
sostituisce ed annulla ogni precedente.I prezzi indicati si
riferiscono a singolo diffusore.
Le caratteristiche e i prezzi indicati possono variare senza
preavviso telefonare o inviare un e-mail per ulteriori domande e
conferme sui prezzi sopra riportati.
Prezzi
franco
nostro magazzino
Nota bene
Tutti i marchi citati nel presente listino sono di proprietà e
registrati alle rispettive Case Produttrici | 
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
