HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 

 

 


                


GIRADISCHITelefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per ordine e ultimo prezzo 0174 670100  info@newaudio.it


AUDIO NOTE AN TT1   €.1500,00   Per ordine e sconto TELEFONA/E-MAIL

Giradischi analogico – singolo motore – telaio sospeso su tre punti – piatto acrilico finitura walnut  O finitura black

One motor turntable with three point suspended sub chassis, acrylic platter, available in beech, rosewood, cherry and black ash. Although the TT-1 would appear an entry level product, we have not compromised on component quality; You still have a solidly built chassis, acrylic platter and precision bearing that should last a lifetime

      

AUDIO NOTE AN TT2  €.2.100,00 Per ordine e sconto TELEFONA/E-MAIL

Giradischi analogico – doppio motore – telaio sospeso su tre punti – piatto acrilico finitura black

Two motor version of the TT-1 with increased torque and stability. Three point suspended sub chassis, acrylic platter, available in black ash only


TESTINETelefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per ordine e ultimo prezzo 0174 670100  info@newaudio.it


                          

AUDIO NOTE IQ 1 €. 650,00   Per ordine e sconto TELEFONA/E-MAIL

Testina MM – peso 6 gr – diamante tipo FG2-Stilo sostitutivo per testina IQ1 260,00 euro

The Audio Note IQ cartridges are the finest Moving Magnet designs currently available. A refinement of the established Moving Magnet principle, they offer an excellent combination of exceptional tracking ability, dynamic range and longevity, thanks to the extremely high quality components used for their construction. Each model employs a highly rigid Pocan™ body shell, equipped with integral threaded inserts for easy installation in the tonearm head-shell. This mounting system greatly improves mechanical coupling between the cartridge body and head-shell in comparison to the traditional nut & bolt fixing.
A detachable stylus assembly was chosen to facilitate easy replacement or upgrade. In fact, All three models in the IQ range use the same body shell, so it is a very simple and cost effective procedure to upgrade from an IQ I to an IQ II or IQ III, merely by changing the stylus assembly. The coils in all of the IQ cartridges are made from high purity, 'four nines' copper wire that is of an incredibly small diameter. We have often been asked why we do not produce a silver coil version in the IQ range; the reason, quite simply, is that it is not possible to produce silver in such a minuscule, fine gauge! The suspension of the IQI is stiffer than usually found in a Moving Magnet cartridge, and uses a cantilever formed from a specially hardened aluminium tube. Careful attention is paid to the mechanical assembly of the generator, and for the stylus diamond, we chose the highly regarded Gyger Type

                                                                                  

AUDIO NOTE IQ2   €.900,00   Per ordine e sconto TELEFONA/E-MAIL

Testina MM – peso 6 gr – diamante tipo FG1-Stilo sostitutivo per testina IQ2 340,00 euro

The Audio Note IQ cartridges are the finest Moving Magnet designs currently available. A refinement of the established Moving Magnet principle, they offer an excellent combination of exceptional tracking ability, dynamic range and longevity, thanks to the extremely high quality components used for their construction. Each model employs a highly rigid Pocan™ body shell, equipped with integral threaded inserts for easy installation in the tonearm head-shell. This mounting system greatly improves mechanical coupling between the cartridge body and head-shell in comparison to the traditional nut & bolt fixing. A detachable stylus assembly was chosen to facilitate easy replacement or upgrade. In fact, All three models in the IQ range use the same body shell, so it is a very simple and cost effective procedure to upgrade from an IQ I to an IQ II or IQ III, merely by changing the stylus assembly. The coils in all of the IQ cartridges are made from high purity, 'four nines' copper wire that is of an incredibly small diameter. We have often been asked why we do not produce a silver coil version in the IQ range; the reason, quite simply, is that it is not possible to produce silver in such a minuscule, fine gauge! The IQII is similar to the IQI, employing the same precision aluminium cantilever. However, its performance is significantly improved by the addition of the superior AN Type 2 diamond, used in the IQIII and IO I cartridges.

                                                                                 

AUDIO NOTE IQ3  €.1.350,00 Per ordine e sconto TELEFONA/E-MAIL

Testina MM – peso 6 gr – diamante tipo AN2 – cantilever in titanio  Stilo sostitutivo per testina IQ3 520,00 euro

The Audio Note IQ cartridges are the finest Moving Magnet designs currently available. A refinement of the established Moving Magnet principle, they offer an excellent combination of exceptional tracking ability, dynamic range and longevity, thanks to the extremely high quality components used for their construction. Each model employs a highly rigid Pocan™ body shell, equipped with integral threaded inserts for easy installation in the tonearm head-shell. This mounting system greatly improves mechanical coupling between the cartridge body and head-shell in comparison to the traditional nut & bolt fixing. A detachable stylus assembly was chosen to facilitate easy replacement or upgrade. In fact, All three models in the IQ range use the same body shell, so it is a very simple and cost effective procedure to upgrade from an IQ I to an IQ II or IQ III, merely by changing the stylus assembly. The coils in all of the IQ cartridges are made from high purity, 'four nines' copper wire that is of an incredibly small diameter. We have often been asked why we do not produce a silver coil version in the IQ range; the reason, quite simply, is that it is not possible to produce silver in such a minuscule, fine gauge! The IQ III uses the same cantilever and diamond found in the legendary Audio Note IO I moving coil cartridge. Made from titanium tube rather than aluminium, the cantilever is unique, and in combination with the AN Type 2 diamond, offers a level of performance that was often though impossible to achieve with a Moving Magnet design

                      

AUDIO NOTE IOL  €.3.900,00   Per ordine e sconto TELEFONA/E-MAIL

Testina MC a bassa uscita – peso 11gr - diamante tipo AN2 – cantilever in titanio – uscita 0,05 mV – bobine in argento – magneti in alnic

AUDIO NOTE An-S3L AG  €.3.500,00   Per ordine  e sconto  TELEFONA / E-MAIL

Trasformatore MC doppia impedenza di ingresso (L= 3 e 12 ohm H= 20 e 80) – cablaggio in argento – supporto in mumetal – guadagno 28/30 dB (L)

All low versions should be used with Audio Note™ MC cartridges to get best bandwidth and dynamic conversion to retain harmonic envelope best possible.The new AN-S3 (meaning NOT the AN-S3L-AG which is being slowly phased out) and AN-S4 there are now 6 versions of each, 1 Ohm, 4 Ohm, 9 Ohm, 16 Ohm, 36 Ohm and 64 Ohm, the 1 Ohm is for all the Audio Note™ Io cartridges and the rest are for other low output moving coils, such as Dynavector, Denon, Clearaudio, Koetsu, Lyra, Goldbug, van den Hul, Allerts, Ortofon, Goldring and Micro Benz. It is important to appreciate the utmost importance of getting the impedance matching between the cartridge coil and the primary of the transformer as close as possible, we used to sell a transformer, the AN-S7, which had 6 switchable impedances, which was a great help when determining which impedance suited a cartridge best, however, the trade-off in sound quality from the multible taps on the transformers and the switches were too great. All Audio Note™ MC transformers are housed in solid copper chassis’s for best sound. Despite this they are quite sensitive to positioning, and hum will occur when they are too close to power cords, supplies or electric motors and their associated wiring (from a separate turntable power supply to the turntable itself for example), so careful positioning is mandatory


                                                                       


Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO

Clicca per qui per vedere :  DATI TECNICI   SPECIFICHE PRODOTTO


Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


Attenzione 

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a  info@sinergy.us

info@newaudio.it

Il presente listino sostituisce ed annulla ogni precedente.I prezzi indicati si riferiscono  a singolo diffusore.
Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riporta
ti. Prezzi franco nostro magazzino


Nota bene Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici